VauxSport - Vauxhall advice and chat forum

fennyLET · Posted: Mon Mar 01, 2010 11:42 pm Post subject:

No bother mate beer

Nice to see you again aswell.
_________________
Quote from PV "Your car could win....... if it rains"
Something along those lines anyway lmao lmao

Rich_j_Williams · Posted: Fri Mar 05, 2010 8:07 am Post subject:

right had an unexpected dayy of yesterday and we had a little bit of spare time in the afternoon and did a bit on the car

firstly i todied up the wiring under the inlet now that there is no inlet on there to amke sure everything is clear of the gear linkage etc. then i relocated the head tank as it was in the way now so we relocated here

extended the pipework

Then i mounted and piped up the FPR regulator, it could do with securing a bit better but is ok for now

I also sorted the feed to the fuel rail too but forgot to take a pic

whilst i was doing this matt painted up the back so we now have no holes..lol

_________________

chip · Posted: Fri Mar 05, 2010 10:52 am Post subject:

Rich_j_Williams · Posted: Fri Mar 05, 2010 12:53 pm Post subject:

Rich_j_Williams · Posted: Fri Mar 05, 2010 12:54 pm Post subject:

i will also add text to the above pics as i transferred that on my phone before Thumbs Up

_________________

Rich_j_Williams · Posted: Sat Mar 06, 2010 6:21 pm Post subject:

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0319310

part no - 319310

can anyone point ne to the part nymbers to the other plugs i will need?

cheers
_________________

Rich_j_Williams · Posted: Wed Mar 10, 2010 11:57 am Post subject:

let injectors have arrived.. wahoo Thumbs Up

_________________

fennyLET · Posted: Wed Mar 10, 2010 2:12 pm Post subject:

Im not keen on your Water pipe extenstions mate frown

_________________
Quote from PV "Your car could win....... if it rains"
Something along those lines anyway lmao lmao

Rich_j_Williams · Posted: Wed Mar 10, 2010 2:19 pm Post subject:

dewismotorsport · Posted: Wed Mar 10, 2010 5:24 pm Post subject:

Rich_j_Williams · Posted: Wed Mar 10, 2010 5:39 pm Post subject:

will do mate

i will be back tomorrow night as i need to measure up a few things sow ill get it all sorted

cheers mate, i will phone you later mate anyway, just for a chat and possibly a bit of lovin Thumbs Up

_________________

fennyLET · Posted: Wed Mar 10, 2010 6:00 pm Post subject:

That doesnt look like very "solid" pipe to me mate.

_________________
Quote from PV "Your car could win....... if it rains"
Something along those lines anyway lmao lmao

Rich_j_Williams · Posted: Wed Mar 10, 2010 8:30 pm Post subject:

I could not squeeze it with my fingers but that may change when it gets hot, Dewis is going to sort me out some decent pipe though Thumbs Up

_________________

Rich_j_Williams · Posted: Thu Mar 18, 2010 1:42 pm Post subject:

update time..finally

progress has seen a slow down as unfortuntaly my nan next door passed away recently so our enthusiasm dropped off.

however as i have been at home we have done a few bits

whilst i was sorting out the throttle boddies matt did this..makes the inside loads nicer

i cut off a bit of pipe to extend the pipe from the relocated header tank. loads better than before Thumbs Up

i also made some spacers for the rail so the injectors can be secured in nice and tight

then after that i pipeed it all up and tightened it all up

only thing left to do now is mount the fpr properly and then really it just need the management

matt also remounted our fire extinguisger so somewhere a little more accessible

things to do next are:

1 - sort manifold which i am hopeing to have sorted by the weekend
2 - get the M tech V 4 which chip has kindly sorted for us
3 - by all the plugs and fittings to make up the loom
4 - get a tps

only problems i forsee is making the exhuast mate up to our current exhaust.. which i may need to speak nicley to the legendary dewis motorsport Thumbs Up

but it depends on what time he has..lol

that is all Thumbs Up

_________________

dewismotorsport · Posted: Thu Mar 18, 2010 2:30 pm Post subject:

Rich_j_Williams · Posted: Thu Mar 18, 2010 9:50 pm Post subject:

Will do mate, just getting things on to fit will be painting when we have a good day on it.

love

much love

p.s good work on chips manifold mate looking good Thumbs Up

_________________

flatout · Posted: Thu Mar 18, 2010 11:07 pm Post subject:

Nice update mate, wont be long now Thumbs Up

_________________
Rich_j_williams built chips engine ;)

Rich_j_Williams · Posted: Mon Apr 12, 2010 1:22 pm Post subject:

let the games begin on something new :dunno:

bits we wont miss about the blue trackcar

leaking engine... and not the odd drip, like the sump had a 50p sized hole in it

Crapy Spax RSX - it rattled and the rear shock rebound was only good on the softest

it was a touch lagy..lol
_________________

lennoxlewis · Posted: Mon Apr 12, 2010 2:46 pm Post subject:

Rich,

please document well the Mtech V4 fitment! pleaaaaaseeeee!

i am very interested in that solution for my c20xe beeing a plug and play solution...

cheers Thumbs Up

_________________
Tigra XE - Captains Log Click here!
GhettoMechanics Team - Portugal

chip · Posted: Mon Apr 12, 2010 3:24 pm Post subject:

Rich, you'll love finally driving a car that doesnt LAG all the time!
_________________
Under 400bhp makes baby jesus cry.
(so my boost leak at the jamsport day must have had him sobbing like rich j williams watching a chick flick)

www.totalvauxhall.co.uk

Nova - 457bhp - Mid Engine - RWD - GT35 - Autronic SM4